40ft High Cube Container

excl. VAT · incl. VAT: €4,282.81

Extra vertical loading headroom and volume: 40ft high cube container for sale

The forty-foot High Cube shipping container provides the ultimate combination of floor space and vertical loading height for international freight forwarders, commercial warehousing operations, and modular architectural conversions. Built to ISO 1AAA specifications with external dimensions of 12.192m in length, 2.438m in width, and an increased height of 2.896m (9ft 6in), choosing a 40ft high cube container for sale provides 30 centimeters of extra interior ceiling clearance compared to standard models, unlocking a generous 76.30 m³ cubic capacity. That extra height is the single reason so many buyers specify the High Cube: it is the difference between a tight fit and a comfortable one for tall palletized freight, stacked racking, and fitted-out interiors.

With an unladen tare weight of 3,900 kg and an authorized payload capacity of 26,580 kg, the container achieves a maximum gross weight rating of 30,480 kg. The internal clear height of 2.693m allows warehouse operators to double-stack tall palletized cargo or install multi-tier pallet racking systems that maximize vertical floor space utility. Delivered in one-trip condition, the box arrives clean, dry, and structurally sound, ready to serve as long-span storage or as a conversion base without any refurbishment.

Key specifications of the 40ft high cube container

The table below lists the core technical figures for the 40ft high cube container for sale so you can confirm chassis compatibility, crane capacity, and door clearances before ordering.

High-cube structural geometry, extended corner columns, and Corten A panels

Accommodating the additional 30 cm structural height requires specialized frame engineering. The four vertical corner posts are cold-formed from high-tensile 6 mm Corten A steel, reinforced to absorb massive stacking loads up to nine containers high. The Corten alloy naturally forms an impermeable oxide patina when exposed to weather, stopping rust progression without degradation. The taller posts are engineered so the High Cube stacks safely in the same cell guides as standard boxes, keeping it fully compatible with terminal handling worldwide.

The sidewalls are formed from 1.6 mm thick vertically corrugated steel sheets, while the roof consists of 2.0 mm die-stamped corrugated steel panels. High-strength perimeter top and bottom box rails are continuously seam-welded to the wall corrugations, providing immense torsional rigidity against long-span bending and marine vessel racking stresses. Across the twelve-meter length this rigidity matters even more than on a short box, since any twist is amplified over the longer span.

Oversized rear double doors, four tubular locking bars, and multi-lip EPDM seals

Loading tall cargo is facilitated by extended rear double steel doors with an opening height of 2.585m. Hung on eight forged steel hinges with greaseable pins and low-friction bushings, the door leaves open fully to 270 degrees against the exterior sidewalls. The tall aperture lets a forklift carry stacked or high-mounted loads straight through the doorway without tilting the mast.

Four heavy galvanized steel locking rods engage forged cams into top and bottom frame keepers to compress the doors firmly against the portal. Continuous multi-lip EPDM rubber weatherstripping seals the entire door perimeter, creating a certified wind-and-watertight barrier that protects interior cargo from rainfall, snow, and airborne salts. The compression latching pulls the seal evenly against the jamb so the box stays dry even under wind-driven rain.

28 mm hardwood marine decking, high axle ratings, and lashing rings

The interior cargo deck is built from 28 mm multi-ply tropical hardwood marine plywood, pressure-sealed with environmentally safe moisture and fungal repellents. Supported by heavy-duty steel transverse crossmembers welded at close intervals along the bottom rails, the deck supports intense forklift wheel loadings during pallet staging. The plywood is bonded with weatherproof resin so it resists swelling and delamination through years of damp handling.

Multiple forged steel lashing D-rings rated at 1,000 kg each are welded along the lower side rails and upper roof corners, allowing operators to lash tall machinery crates and multi-tier cargo rows securely with heavy-duty ratchet straps. Securing tall loads at both floor and roof level keeps the centre of gravity controlled during transport of high stacks.

Factory-welded lockbox security and jobsite protection

Security is essential when storing high-value inventories on active building sites. Every 40ft high cube container for sale includes a heavy-gauge factory Corten steel lockbox shroud centered on the rear door interface. On unmanned sites this deters the opportunistic theft that plain padlocks invite.

The shroud encloses an internal high-security padlock on all sides, guarding against bolt-cutter attacks, pry bars, and cutting torches. Additional padlock eyelets on the locking handles provide secondary locking options for project managers, letting different crews carry different keys under a controlled access plan.

Passive cross-flow air vents and multi-layer marine polyurethane finish

To reduce internal moisture build-up and prevent condensation on stored goods during thermal swings, baffled labyrinth air vents are mounted high in the side corrugations. These louvers maintain continuous passive airflow while preventing water intrusion. Gentle ventilation is the simplest defence against the container sweat that forms when warm air meets cold steel overnight.

The exterior steel envelope receives automated abrasive blasting, followed by a zinc-rich epoxy primer and an ultra-tough polyurethane marine topcoat that resists severe ultraviolet exposure and coastal salt fog. The blasting profile gives the primer a strong mechanical key, which is why the finish stays intact through years of outdoor exposure.

CSC safety approval plate and multimodal freight compliance

Every single-trip 40ft high cube container for sale carries an active Convention for Safe Containers (CSC) safety approval plate riveted to the rear door. Certified by international classification bureaus, the container is approved for global rail flatcar, road trailer, and container vessel transport. The plate confirms the box meets the ISO 1496 structural test loads for stacking and lifting.

Integrated ISO corner castings at all eight structural corners permit rapid handling with container spreader bars, reach stackers, and mobile cranes. These standard castings are what let the same box move seamlessly between ship, rail, and road across any terminal in the world.

Ideal platform for two-tier conversions, offices, and residential architecture

The additional 30 cm interior headroom makes the 40ft High Cube the premier base unit for architectural modular buildings. The extra ceiling clearance allows contractors to install thick subfloor insulation, recessed HVAC ducting, and ceiling panels while retaining a spacious 2.40m finished interior room height. That finished height is what separates a comfortable, code-friendly room from a cramped one once linings are added.

We modify these units into multi-room site offices, modular living quarters, laboratory complexes, and battery energy storage enclosures with factory-fitted doors, windows, and electrical packages. Because the shell is already weatherproof and lockable, a fitted-out unit can be delivered and commissioned far faster than a conventional build.

Maintenance procedures and foundation leveling

Routine maintenance is simple. Lubricate the door hinge fittings and locking bar cams semi-annually with marine grease, and inspect the EPDM perimeter gaskets annually for cleanliness. A quick check of the roof for pooled water and of the vents for blockage keeps the interior dry.

Always support the container on four level concrete foundation pads or timber sleepers. Proper leveling prevents frame twist over the 12-meter span and ensures smooth door closure over decades of commercial service. Over a long box, even a small settlement at one corner is enough to bind the doors, so a level base is the single most important preparation step.

Depot inventory and crane truck delivery across Europe

We maintain comprehensive stock of brand-new single-trip 40ft High Cube containers across major depot hubs in Germany and Central Europe. Each container is inspected before dispatch to ensure spotless interior conditions and flawless mechanical function. Our team can confirm the exact specification and availability of your chosen unit before it ships.

We provide flatbed road transport and self-unloading crane truck delivery to position your High Cube container accurately on your prepared site foundation. A crane truck reaches over obstacles and sets the long box down precisely on the pads you have prepared, which is often impractical with a forklift alone.

What is the main advantage of a 40ft high cube container over a standard container?

A 40ft High Cube container provides an extra 30 cm (1 foot) of vertical clearance, delivering 2.70 m of interior ceiling height and 76.30 m³ of storage volume. This allows double-stacked pallets, tall machinery, and high-density warehouse racking systems without clearance issues. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

What are the exact external dimensions and payload capacity of this container?

External dimensions are 12.192m length, 2.438m width, and 2.896m height. The container has a net tare weight of 3,900 kg, an impressive payload capacity of 26,580 kg, and a maximum gross operating weight of 30,480 kg for heavy industrial freight. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

Is a factory-welded security lockbox included on the double doors?

Yes, every brand-new 40ft High Cube container includes a heavy-gauge Corten steel factory-welded lockbox. The protective shroud completely encloses high-security padlocks on all five sides to prevent bolt cutters and angle grinders from attacking the lock shackle. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

Can forklifts drive onto the hardwood floor during heavy pallet loading?

Yes, the 28 mm thick marine-grade multi-layer hardwood plywood floor is screwed directly to heavy steel bottom crossmembers. It easily supports heavy industrial forklifts, electric pallet trucks, and concentrated point loads from heavy machinery skids and equipment. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

Is the 40ft high cube container CSC certified for international shipping?

Yes, every new one-trip High Cube container comes with an active CSC safety approval plate certified by international classification societies. It meets all ISO standards for multimodal transport via road chassis, rail wagons, and container cargo vessels worldwide. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.