40ft Used High-Cube Refrigerated Container

Delivery included · Sales tax, where applicable, is added on the invoice

High-volume industrial temperature control: 40ft used high cube refrigerated container for sale

For industrial food processors, pharmaceutical logistics hubs, agricultural cooperatives, and beverage distributors requiring massive temperature-controlled storage capacity, a 40ft used high cube refrigerated container for sale provides the ultimate large-scale cooling solution. Built to ISO High Cube dimensions measuring 1219.20 cm in length, 243.79 cm in width, and 289.61 cm in height (9ft 6in), this 67.80 m³ refrigerated vault accommodates up to 23 standard Euro pallets with full 2.45m interior vertical clearance. The insulated internal dimensions of 1158.39 cm length, 229.00 cm width, and 255.60 cm height yield 26.53 m² of hygienic floor area within a fully sealed cold envelope.

With an unladen tare weight of 4,600 kg and an authorized payload capacity of 29,400 kg, the unit reaches a certified maximum gross operating mass of 34,000 kg. Powered by a high-output 380V/460V 3-phase electric refrigeration system (Carrier Transicold, Thermo King, or Daikin), the container delivers precise temperature control across a wide spectrum from minus 30 degrees Celsius up to plus 30 degrees Celsius. Every unit undergoes a rigorous multi-hour Pre-Trip Inspection (PTI) test before dispatch. Choosing a 40ft used high cube refrigerated container for sale gives an operator a turnkey cold room at a fraction of the cost of a built-in chamber, with the added benefit that the asset can be relocated whenever the business moves.

The appeal of the used reefer lies in the combination of proven refrigeration hardware and honest secondary-market pricing. These machines were engineered to hold precise temperatures continuously through years of ocean service, so a well-maintained unit that has been retired from active shipping still has a long working life ahead of it as a stationary cold store, provided it receives the routine servicing any refrigeration plant requires.

Heavy polyurethane insulated sandwich walls, stainless interior, and Corten frame

The thermal construction of the 40ft High Cube reefer is engineered for maximum thermal efficiency over large surface areas. The perimeter envelope incorporates high-density rigid polyurethane foam insulation (75 mm to 100 mm thick) injected between outer Corten A steel cladding and an inner lining of food-grade stainless-steel panels. This continuous foam core carries no thermal bridges across the wall field, so the cold chamber holds its setpoint with the compressor cycling far less often than an uninsulated box ever could.

This seamless sandwich build-up stops thermal transfer, maintaining constant sub-zero temperatures even under direct blazing summer sunlight while minimizing electrical compressor runtime. The non-porous stainless-steel interior walls resist aggressive cleaning agents and sanitizers, facilitating hygienic washdowns that satisfy strict IFS and HACCP food safety standards. Because the lining is a smooth stainless surface rather than painted steel, there are no coatings to flake into product and no porous seams for bacteria to colonise, which is exactly why processors specify reefers for direct food contact storage.

The outer Corten A shell protects the insulation and machinery from mechanical damage and weather, while the reinforced steel frame carries the same corner casting loads as any ISO container. This means the used reefer can be craned, stacked, and transported on standard chassis just like a dry box, so siting it on a prepared foundation is a routine lift for any container haulier.

Heavy-duty aluminium T-bar floor and continuous airflow circulation

The interior cargo deck consists of heavy extruded aluminium T-section airflow channels welded into a watertight, slip-resistant floor pan. The longitudinal T-bars act as an underfloor air distribution duct, guiding high-volume chilled air beneath pallet rows. This engineered floor is one of the defining features of a reefer, because it lets the refrigeration unit push conditioned air under the entire load rather than simply blowing it across the top of the pallets.

The cold air rises through pallet spaces and circulates continuously back along the ceiling to the evaporator fan assembly. This positive pressure circulation eliminates temperature stratification and ensures that frozen or chilled products remain at uniform temperatures throughout the 12-meter cargo chamber. Even at the far end of the box, away from the machinery bulkhead, the circulated air holds product within a tight tolerance of the setpoint, which is essential for regulated cold-chain goods.

The aluminium T-bar deck is also structurally robust and easy to keep clean, since spillages and wash water drain along the channels toward the door sill rather than pooling under the load. Operators simply keep the channels clear of packaging debris so the airflow path stays open and the cooling performance remains uniform.

Heavy insulated rear doors, dual camlock bars, and silicone thermal gaskets

Cargo loading is facilitated by thick insulated double rear doors hung on eight heavy-duty stainless-steel hinge sets with self-lubricating bushings. Four vertical tubular locking bars engage heavy forged steel cams deep into frame keepers to compress the doors tightly. The doors themselves are foam-filled to match the wall insulation, so the whole envelope performs as a single continuous cold barrier without a weak point at the opening.

Multi-fin continuous silicone and EPDM thermal rubber gaskets encircle the entire door perimeter, creating an airtight seal that eliminates cold air loss and prevents ice formation around the door frame rebate. A sound gasket is critical to efficient running, because even a small breach lets warm humid air into the chamber where it freezes into ice that then blocks the seal further, so our depot checks the gasket compression along the full perimeter before a unit is released.

Microprocessor temperature control and automated defrost cycles

The refrigeration machinery features an advanced digital microprocessor controller mounted on the front machinery bulkhead. Operators can set temperature setpoints to single-decimal precision, configure humidity control parameters, and initiate automatic hot-gas or electric defrost cycles. The controller manages the compressor, evaporator fans, and defrost heaters as an integrated system, holding the chamber at the target temperature without constant manual intervention.

Built-in digital data loggers record temperature history continuously, providing downloadable audit trails for regulatory compliance in pharmaceutical cold chain and frozen food logistics. This recorded history is often a legal requirement for regulated goods, and the ability to export a temperature log for a given date range makes the used reefer suitable for quality-controlled storage rather than casual cooling alone.

CSC safety approval and stationary commercial yard deployment

Every 40ft used high cube refrigerated container for sale carries an active or renewable Convention for Safe Containers (CSC) safety plate, certifying structural strength for intermodal road, rail, and sea transport. The plate confirms that the frame and corner fittings meet the racking and stacking standards required for lifting and handling, which matters even for a unit destined to stand still, because it still has to be craned onto its foundation.

Standard ISO corner castings at all eight structural nodes permit rapid lifting with reach stackers, container spreaders, and heavy yard cranes. Once positioned and connected to power, the reefer functions as a permanent cold store, and the same castings allow it to be lifted and relocated cleanly whenever the operation expands or moves to a new site.

Industrial frozen food storage, dairy depots, and seasonal harvest buffering

Large-scale commercial operations use these 40ft High Cube reefer containers as turnkey outdoor cold storage warehouses. Meat processing facilities store frozen palletized products, dairy distributors buffer seasonal butter and cheese inventories, and wineries maintain stable fermentation temperatures. The unit gives a business instant refrigerated capacity that would otherwise require a costly and permanent building extension with its own planning and construction timeline.

The quiet, all-electric 3-phase refrigeration unit eliminates diesel exhaust fumes, allowing operation directly adjacent to processing plants and logistics loading docks. Because the reefer runs on mains power rather than an engine, it can sit against a production wall or beside a loading bay without emissions or noise concerns, and it can be connected to a building management system for centralised temperature monitoring.

Maintenance protocols and refrigeration condenser care

To maintain peak energy efficiency, clean the exterior air-cooled condenser coils monthly with a soft brush or water spray to remove dust and debris. Inspect the door perimeter gaskets regularly for signs of wear and keep the floor T-channels clean of packing debris. A blocked condenser forces the compressor to work harder and run hotter, raising energy use and shortening component life, so this simple cleaning routine is the single most valuable maintenance habit for a stationary reefer.

Connect the unit to a dedicated 380V/460V 32A 3-phase industrial power supply equipped with appropriate circuit protection. Have the electrical connection made by a qualified electrician against the machinery nameplate rating, and schedule a periodic professional service of the refrigeration circuit so that refrigerant charge, pressures, and defrost operation are checked by a certified technician.

PTI testing, certified pre-delivery inspection, and European transport

Every 40ft High Cube refrigerated container completes a comprehensive Pre-Trip Inspection (PTI) test in our specialized reefer depot, verifying rapid cooling pull-down, defrost performance, and compressor pressures prior to release. The PTI is your assurance that the machine actually holds temperature under load rather than simply powering on, and a signed inspection record accompanies the unit so you know exactly what was tested.

We provide flatbed road transport and self-unloading crane truck delivery to set the refrigerated container directly onto your prepared foundation coordinates. Our technical team is available to assist with specifications, electrical requirements, site preparation, and rapid European dispatch, so the cold store is ready to commission on the day it arrives.

What temperature range does the 40ft used high cube refrigerated container maintain?

The integrated industrial refrigeration unit provides a wide operating temperature range from minus 25 degrees Celsius deep freeze up to plus 25 degrees Celsius warm storage, regulated precisely via a digital micro-processor controller within 0.5 degrees accuracy under all conditions. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

What electrical power connection is required to operate this 40ft reefer?

The refrigeration unit operates on a standard 380V to 460V 3-phase 32A CEE industrial power supply (50/60 Hz). It connects easily to permanent building mains distribution boards or a dedicated heavy-duty site diesel generator set on remote locations. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

What is a Pre-Trip Inspection (PTI) and is it included with this container?

A PTI is an exhaustive multi-point diagnostic test conducted by certified refrigeration technicians. It tests compressor performance, refrigerant pressures, electronic defrost cycles, and pulls temperatures down to minus 20 degrees Celsius. A signed PTI certificate is included. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

What are the exact dimensions and storage capacity of this container?

External dimensions are 1219.20 cm length, 243.79 cm width, and 289.61 cm height. Internal dimensions are 1158.39 cm length, 229.00 cm width, and 255.60 cm height, providing 26.53 m² of floor space, 67.80 m³ volume, and a tare weight of 4,600 kg with 34,000 kg max gross. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.

Is there an emergency release inside the container to prevent personnel entrapment?

Yes, every refrigerated container is equipped with an internal mechanical glow-in-the-dark panic exit release handle. This safety mechanism allows personnel to open the doors immediately from inside even if external locking bars are padlocked shut. Our technical team is available to assist with specifications, site preparation, and rapid European dispatch for your facility.